Shop

Wireless Battery-Powered Proximity Reed Switch Sensor

399,64

SKU: IMAG163010-REED-ROT Category: Tag:
Share:
Synopsis

The magnetically actuated internal Reed switch monitors the presence of machine components. The Proximity Switch Sensor is especially designed to monitor the rotation speed (RPM) of rotating equipment wireless on adjustable intervals. The sensor collects simultaneously temperature data.

Description

Description

Industrial Wireless Battery-Powered Proximity Reed Switch Sensor (Magnetic)

The iQunet Proximity (Reed) Switch Sensor is a small battery-powered device that collects continuously data and transmits wireless the gathered data on free adjustable time intervals.

 

The magnetically actuated internal reed switch monitors the presence of machine components. The normally open switch is closed in the presence of a magnet. The sensor is especially designed to monitor the rotation speed (RPM) of rotating equipment wireless on adjustable intervals. The sensor collects simultaneously temperature data. The sensor is powered by 2 standard CR2032 coin cells (included) which assures function for several years in standard operation mode.

 

The sensor makes a network direct to the central Base Station node or via the optional Repeater.  Sensor data is visualized in the iQunet Sensor Dashboard on the iQunet Data Server, offering temperature graphs, RPM readings, counter reading, etc.

 

Used in: monitoring wireless rotation speed of machinery, open or close status of e.g. doors, guards, etc., monitoring of machine cycles, …

 

Technical specification:

  • Physical: 
    • Dimensions (mm): 57 x 47 x 14
    • Weight: 35g
    • Case material: thermoplastic
    • Sealing: IP65 (IP68 with upgrade set)

  • Installation: M3 screws (epoxy adhesive for permanent mount)
  • Operating temperature: -20°C to +70°C
  • Recommended storage temperature: +30°C maximum
  • Certifications: 
    • CE

  • Wireless communications range: up to 50 m typically in plant (actual range depends on specific site topology and device placement)
  • Power supply: 2 x 3V (replaceable CR2032 battery)
  • Measurements: 
    • Count range: 0 to 232 pulses
    • RPM range: 0 to 1500 rpm

  • Temperature sensor on board: yes
  • Start data acquisition:
    • Manual trigger (REC button in Sensor Dashboard)
    • Automatic measurements (programmable time interval)
    • Conditional automatic measurements (programmable threshold level)
  • Communication protocols:
    • Subscribe to sensor parameters and data with OPC UA
    • Control sensor settings and start measurements using GraphQL mutations
    • Read out sensor parameters and data using GraphQL queries
  • Data storage: on iQunet Data Server
Documents

Proximity Reed Switch Sensor Datasheet

Download(298 KB)

Positions Sensor Elements

Download(1 MB)

Battery Replacement Instructions

Download(211 KB)